The Oxylance Sure Cut Exothermic Cutting System (JRSC2024S) is a complete, ready-to-use cutting kit designed for the toughest industrial, rescue, and maintenance environments. It allows operators to cut virtually any metal—ferrous or non-ferrous—faster than oxy-acetylene or carbon arc gouging, with no preheating or surface cleaning required. The system is easy to use, reliable, and cost-effective for nearly any cutting or piercing application.
📄 Additional InformationKit Includes
- Sure Cut torch handle assembly with oxygen control valve
- 10 ft oxygen hose with factory-installed fittings
- 25 ft of welding lead
- 25 ft of ground lead
- Quick-connect torch handle
- Spark ignition striker
- 12 – ¼″ × 24″ SureCut Quick Connect cutting rods
- 12 – ⅜″ × 24″ SureCut Quick Connect cutting rods
Performance Examples
| Application | Rod Used | Performance |
|---|---|---|
| 1¼″ × 12″ frozen pin | ¼″ × 24″ rod | Pierced in 16 seconds |
| 4″ × 12″ crane pin | 3 rods (⅜″ × 36″) | Pierce: 20 sec • Enlarge: 5 min • Remove (after cooling): 25 min |
| 5″ × 16″ pin | 6 rods (⅜″ × 48″) | Pierce: 35 sec • Enlarge: 15 min • Remove (after cooling): 30 min |
| ¼″ steel plate | ⅜″ × 48″ rod | 10 ft cut in 2 minutes |
| ⅜″ stainless steel plate | ⅜″ × 48″ rod | 4 ft cut in 2 minutes |
| Heat exchanger (½″ stainless tubes, 3 ft dia.) | 3 rods (⅜″ × 48″) | Full cut completed in 6 minutes |
| Aluminum bus bar (2″ × 8″) | ⅜″ × 24″ rod | Complete cut in 45 seconds |
| Gouging – ¾″ fillet weld (18″ long) | ⅜″ × 36″ rod | Gouged to root in under 40 seconds |
Results may vary depending on material hardness, position, and operator experience.
Key Features
- Cuts virtually any metal – ferrous and non-ferrous materials
- Faster than oxy/fuel or carbon arc gouging – saves time and oxygen
- No preheating or cleaning required – ready to cut immediately
- Residue-free cutting – leaves no carbon contamination
- Safe standoff operation – allows cutting from a distance
- Quick-connect rod design – join rods to extend reach during rescue or demolition
- Oxygen-only power – requires no electricity
- Portable and rugged – jobsite-ready with heavy-duty storage case
Technical Specifications
Manufacturer: SureCut Systems
Model Number: JRSC2024S
Type: Exothermic Cutting System (Complete Kit)
Rod Compatibility: ¼″, ⅜″, and ½″ SureCut Quick Connect rods
Included Rods: 12 × ¼″ × 24″ and 12 × ⅜″ × 24″ rods
Power Source: Industrial oxygen cylinder
Applications: Cutting, gouging, piercing, demolition, rescue, maintenance
Reviews
There are no reviews yet.